No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DRIVER_1. hwBoardSoftwareException

DRIVER_1. hwBoardSoftwareException


You need to reset the board to make the patches take effect and ports up. (Slot=[Slot])

Restart the card to make the patch take effect and make the interface go Up.




Alarm or Event


Trap Severity


Mnemonic Code


Trap OID

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.


Parameter Description


Slot ID of a card.

VB Parameters


Impact on the System

The patch does not take effect and the interface does not go Up.

Possible Causes

  • In an in-band stack scenario, a card is not restarted after a cold patch is installed on the master switch.


  1. Restart the card.

Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 127518

Downloads: 27

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next