STACKMNG_1.3.6.1.4.1.2011.5.25.183.1.22.23 hwStackMemberAdd
Description
The stack member device joined in. (hwStackIdIndex=[hwStackIdIndex], hwStackId=[hwStackId], hwStackMacAddress=[hwStackMacAddress])
Attribute
Attribute |
Description |
---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwStackMemberAdd |
Trap OID |
1.3.6.1.4.1.2011.5.25.183.1.22.23 |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
This is an event trap and does not involve the matching trap. |
Parameters
Procedure
- Check whether the member device is added manually.
If so, no action is required.
If no, go to step 2.
- Run the display stack configuration command to check whether the
stack configuration complies with the requirement.
- If so, go to step 3.
- If no, modify the stack configuration and remove excess stack member devices.
- Collect trap messages, log messages, and configurations, and then contact technical support personnel.