No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.6 hwMplsTeFrrProtNotAval

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.6 hwMplsTeFrrProtNotAval

Description

The primary Tunnel has been unbound by bypass Tunnel. (PrimaryTunnel: TunnelId=[TunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId]; BypassTunnelId=[BypassTunnelId])

The trap message was sent when the binding between the primary tunnel and the bypass tunnel was deleted.

Attributes

Attributes

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwMplsTeFrrProtNotAval

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.6

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance. 

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter Description
TunnelId Primary tunnel ID
LocalLspId LSP ID of the primary tunnel
IngressLsrId Ingress LSR ID of the primary tunnel
EgressLsrId Egress LSR ID of the primary tunnel
BypassTunnelId Index of a bypass tunnel

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.1.4.1.5

hwTunnelFrrRouteDBBypassIfIndex

hwTunnelFrrRouteDBTunnelIndex

hwTunnelFrrRouteDBTunnelInstance

hwTunnelFrrRouteDBTunnelIngressLSRId

hwTunnelFrrRouteDBTunnelEngressLSRId

Impact on the System

The binding between the primary tunnel and the bypass tunnel is deleted. This causes traffic interruption once the working tunnel goes down.

Possible Causes

1. Configurations changed.

2. The protected tunnel went Down.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 69433

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next