No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.27 hwXQoSFCoEPriorityAlarm

QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.27 hwXQoSFCoEPriorityAlarm

Description

The mapping from PHBs to 802.1p priorities for outgoing packets has been disabled, so 802.1p priorities of FCoE packets may be incorrect and FCoE packets may be lost.

After the mapping from PHBs to 802.1p priorities is disabled for outgoing packets on an interface, the priority of FCoE packets may be incorrect. As a result, FCoE packets may be discarded.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwXQoSFCoEPriorityAlarm

Trap OID

1.3.6.1.4.1.2011.5.25.32.4.1.11.27

Alarm ID

0x09622006

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.28 hwXQoSFCoEPriorityAlarmClear

Parameters

None

VB

None

Impact on the System

After the mapping from PHBs to 802.1p priorities is disabled for outgoing packets on an interface, the priority of FCoE packets may be incorrect. As a result, FCoE packets may be discarded.

Possible Causes

When FCF or NPV is configured, the qos phb marking 8021p disable command is used to disable the mapping from PHBs to 802.1p priorities for outgoing packets on an interface.

Procedure

  1. Run the undo qos phb marking 8021p disable command to enable the mapping from PHBs to 802.1p priorities for outgoing packets on an interface.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 90446

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next