No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.8 hwMplsTeFrrResume

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.8 hwMplsTeFrrResume

Description

Tunnel frr resumes. (TunnelId=[TunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelAdminStatus=[TunnelAdminStatus], TunnelOperStatus=[TunnelOperStatus])

The trap message was output when the primary tunnel was recovered and the traffic was switched back from the bypass tunnel.

Attributes

Attributes

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwMplsTeFrrResume

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.8

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance. 

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter Description

TunnelId

Indicates the ID of the tunnel.

LocalLspId

Indicates the LSP ID of a session.

IngressLsrId

Indicates the LSR ID of the ingress on the tunnel.

EgressLsrId

Indicates the LSR ID of the egress on the tunnel.

TunnelAdminStatus

Indicates the management status of the tunnel.

TunnelOperStatus

Indicates the operating status of the tunnel.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.1.1.1.7

hwMplsTunnelAdminStatus

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.8

hwMplsTunnelOperStatus

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

Impact on the System

Services will not be affected.

Possible Causes

The status of the node or the link protected by the bypass tunnel went to Up.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 80095

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next