No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NQA_1.3.6.1.4.1.2011.5.25.111.6.4 nqaResultsThresholdNotification

NQA_1.3.6.1.4.1.2011.5.25.111.6.4 nqaResultsThresholdNotification

Description

NQA entry over threshold. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], Index=[Index], HopIndex=[HopIndex], AddressType=[AddressType], Address=[Address], Threshold1=[Threshold1], CompletionTimeMax=[CompletionTimeMax], RTDOverThresholds=[RTDOverThresholds])

Indicates that the period of a test exceeded the set threshold. The threshold could be set by the user. The threshold rtd could modify the threshold.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

nqaResultsThresholdNotification

Trap OID

1.3.6.1.4.1.2011.5.25.111.6.4

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

OwnerIndex

Indicates the administrator of an NQA test instance.

TestName

Indicates the name of an NQA test instance.

TargetAddressType

Indicates the destination address type of an NQA test instance.

TargetAddress

Indicates the destination address of an NQA test instance.

Index Indicates the index of the result table.
HopIndex Indicates the hop index.
AddressType Indicates the address type of an NQA test instance.
Address Indicates the address of an NQA test instance.
Threshold1 Indicates the RTD threshold of an NQA test instance.
CompletionTimeMax Indicates the maximum RTT value of an NQA test instance.
RTDOverThresholds Indicates the number of times that the RTT exceeds the threshold.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.111.2.2.1.1

nqaAdminParaTargetAddressType

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

1.3.6.1.4.1.2011.5.25.111.2.2.1.2

nqaAdminParaTargetAddress

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

1.3.6.1.4.1.2011.5.25.111.4.1.1.19

nqaResultsAddressType

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaResultsIndex

nqaResultsHopIndex

1.3.6.1.4.1.2011.5.25.111.4.1.1.20

nqaResultsAddress

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaResultsIndex

nqaResultsHopIndex

1.3.6.1.4.1.2011.5.25.111.2.1.1.7

nqaAdminCtrlThreshold1

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

1.3.6.1.4.1.2011.5.25.111.4.1.1.12

nqaResultsCompletionTimeMax

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaResultsIndex

nqaResultsHopIndex

1.3.6.1.4.1.2011.5.25.111.4.1.1.7

nqaResultsRTDOverThresholds

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaResultsIndex

nqaResultsHopIndex

Impact on the System

None.

Possible Causes

1.

The threshold was set too small.

2.

The network was busy.

Procedure

  1. Run the display cpu command in the system view to check whether the CPU has an excessive usage.

    • If so, go to Step 3.
    • If not, go to Step 2.

  2. In the NQA test view, run the display this command to know the current threshold. Then run the threshold rtd command to modify the threshold as required. The recommended value is 20 ms.

    Perform the test again to check whether the alarm is cleared.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Contact technical support personnel.
  4. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 74550

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next