No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 12800 and 12800E V200R005C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying IP Performance Statistics

Displaying IP Performance Statistics

Procedure

  • Run the display ip statistics [ interface interface-type interface-number ] command to view the IP traffic statistics.
  • Run the display rawip statistics [ verbose ] command to view the RawIP traffic statistics.
  • Run the display rawlink statistics command to view the RawLink packet statistics.
  • Run the display tcp statistics [ verbose ] command to view the TCP traffic statistics.
  • Run the display udp statistics [ verbose ] command to view the UDP traffic statistics.
  • Run the display ip fragment statistics slot slot-id command to check statistics about IPv4 packet fragmentation and reassembly.

    NOTE:

    Only the CE12800E configured with ED-E, EG-E, and EGA-E series cards supports this command.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100039535

Views: 40348

Downloads: 25

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next