No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 12800 and 12800E V200R005C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling ARP Gateway Proxy

Enabling ARP Gateway Proxy

Context

After the ARP gateway proxy function is enabled, a device uses the gateway MAC address to make a reply upon receipt of an ARP request.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bridge-domain bd-id

    The BD view is displayed.

  3. Run arp broadcast-suppress enable

    ARP broadcast suppression is enabled.

    By default, ARP broadcast suppression is disabled.

  4. Run arp l2-proxy gateway-mac

    The ARP gateway proxy function is enabled.

    By default, the ARP gateway proxy function is disabled.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100039535

Views: 38260

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next