No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 12800 and 12800E V200R005C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the DHCPv6 Function

Enabling the DHCPv6 Function

Context

Before configuring the device to function as a DHCPv6 server, enable the DHCPv6 function on the device.

A DUID uniquely identifies a DHCPv6 device. Each DHCPv6 client or server must have only one DUID. A DHCPv6 server identifies clients based on client DUIDs, and a DHCPv6 client identifies servers based on server DUIDs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 enable

    The DHCPv6 function is enabled globally.

    By default, the DHCPv6 function is disabled.

  3. (Optional) Run dhcpv6 duid { duid-value | llt | ll }

    A DUID is set for a DHCPv6 device.

    By default, a DUID is generated in DUID-LL mode.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100039535

Views: 38838

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next