No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

CloudEngine 12800 and 12800E V200R005C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the MSS Value for a TCP6 Connection

Setting the MSS Value for a TCP6 Connection


Setting the maximum value of Maximum Segment Size (MSS) for a TCP6 connection defines the largest TCP6 packet size, allowing TCP6 packets to be successfully forwarded by intermediate devices when no Path MTU is available.


  1. Run system-view

    The system view is displayed.

  2. Run tcp ipv6 max-mss mss-value

    The maximum MSS value is set for a TCP6 connection.

    By default, the maximum MSS value is not configured for TCP6 connections.

  3. Run commit

    The configuration is committed.

Updated: 2019-04-18

Document ID: EDOC1100039535

Views: 43548

Downloads: 25

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next