Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Packet Priority
Procedure
- Run system-view
The system view is displayed.
- Run set priority 8021p 8021p-value
The value of the 802.1p priority is set.
By default, the value of the 802.1p priority is not set.
- Run set priority dscp dscp-value
The value of the DSCP priority is set.
By default, the value of the DSCP priority is not set.
- Run commit
The configuration is committed.
Previous
