No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 12800 and 12800E V200R005C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Fast ARP Reply Function

Configuring the Fast ARP Reply Function

A device that functions as a gateway can have the fast ARP reply function configured so that it can fast respond to ARP Request packets.

Pre-configuration Tasks

Before configuring the fast ARP reply function, complete the following task:

  • Setting link layer protocol parameters for interfaces to ensure that the link layer protocol status of the interfaces is Up

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run undo arp fast-reply disable

    The fast ARP reply function is enabled.

    By default, the fast ARP reply function is enabled.

  3. Run commit

    The configuration is committed.

Verifying the Configuration

  • Run the display current-configuration | include fast-reply command to check the fast ARP reply configuration.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100039535

Views: 38807

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next