No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 12800 and 12800E V200R005C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring ARP-Ping

Configuring ARP-Ping

Pre-configuration Tasks

ARP-Ping includes ARP-Ping IP and ARP-Ping MAC. ARP-Ping sends ARP Request packets or ICMP Echo Request packets to check whether a specified IP address or MAC address is used. Before configuring ARP-Ping, complete the following task:

  • Configuring link layer protocol parameters and IP addresses for interfaces to ensure that the link layer protocol status of the interfaces is Up.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100039535

Views: 42766

Downloads: 25

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next