No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Interfaces to VLANs

Adding Interfaces to VLANs

Context

After a multicast VLAN and a user VLAN are configured, you can add a network-side interface to the multicast VLAN and a user-side interface to the user VLAN.

Procedure

  1. Add network-side the interface to the multicast VLAN. For details, see Configuring Interface-based VLAN Assignment.
  2. Add the user-side interface to the user VLAN. For details, see Configuring Interface-based VLAN Assignment.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039595

Views: 49256

Downloads: 87

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next