No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configured IPv6 Multicast Group Policy Takes Ineffective

Configured IPv6 Multicast Group Policy Takes Ineffective

Fault Description

The configured multicast group policy enables hosts to join certain multicast groups; however, the hosts can still receive multicast data sent to other multicast groups.

Procedure

  1. Run the display acl ipv6 command to check whether the configured ACL6 rules match the multicast group policy.
  2. Run the display mld snooping configuration command to check whether the multicast group policy configured in a VLAN is correct. If not, run the mld snooping group-policy command to configure the correct multicast group policy.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039595

Views: 47457

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next