No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSDP Anycast RP

Configuring MSDP Anycast RP

Context

Anycast rendezvous point (RP) supports the configuration of several RPs with the same address in a PIM-SM domain. MSDP peer relationship is established between these RPs so that the multicast source can register to the closest RP and the multicast receiver can join the closest RP.

Pre-configuration Tasks

Enable Protocol Independent Multicast Sparse Mode (PIM-SM) function on all switches in the PIM-SM domain, without configuring RP.

Configuration Procedure

Perform configuration tasks in the listed sequence.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039595

Views: 46765

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next