No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting IGMP Group Memberships

Resetting IGMP Group Memberships

Context

After IGMP group memberships are reset, group members may fail to receive multicast data. Confirm your operation before clearing IGMP group information.

Procedure

  • Run the reset igmp [ vpn-instance vpn-instance-name | all-instance ] group { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] [ source-address [ mask { source-mask | source-mask-length } ] ] } } command in the user view to reset dynamic IGMP entries on interfaces.
  • Run the undo igmp static-group { all | group-address [ inc-step-mask { group-mask | group-mask-length } number group-number ] [ source source-address ] } command in the interface view to reset static group memberships.
  • Run the reset igmp [ vpn-instance vpn-instance-name | all-instance ] group ssm-mapping { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] } } command in the user view to reset group memberships established with IGMP SSM mapping.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039595

Views: 46753

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next