STACKMNG/4/hwFabricLinkLimitAlarm_active
Message
STACKMNG/4/hwFabricLinkLimitAlarm_active: The number of current fabric links is smaller than the number of fabric links configured. (hwStackFabricPort=[hwStackFabricPort], hwFabricCurrentLinkNum=[hwFabricCurrentLinkNum], hwFabricConfiguredLinkNum=[hwFabricConfiguredLinkNum])
Description
The number of available fabric port links is smaller than the configured alarm threshold.
Possible Causes
Cause 1: The networking is improper or the configured alarm threshold for the number of available fabric port links is high.
Cause 2: The protocol state of the port is Down.
Cause 3: The fabric port link is faulty.
Procedure
- Run the display stack link-state last-down-reason command to check whether a fabric port link is Down.
- If a fabric port link is Down, rectify the fault according to the reason.
- If all fabric port links are Up, go to step 2.
- Increase the number of fabric port links or run the fabric min-links threshold alarm-threshold command to reduce the alarm threshold for the number of available fabric port links.