No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/OSPF_ORIGINATE_LSA: An LSA is generated. (RouterId=[RouterId], LsdbAreaId=[LsdbAreaId], LsdbType=[LsdbType], LsdbLsid=[LsdbLsid], LsdbRouterId=[LsdbRouterId])


An LSA was generated. The possible cause is that the interface status alternated between Up and Down, the OSPF neighbor status changed, or the router role changed (the ABR was changed to the ASBR after an OSPF route was imported).


Parameter Name Parameter Meaning


ID of the local switch


Area ID of the new LSA


LSA type


LSA ID in the LSDB


Router ID in the LSDB

Possible Causes

Cause 1: The interface status alternated between Up and Down.

Cause 2: The neighbor status changed.

Cause 3: The router role changed because OSPF routes were imported.


  • Contact technical support personnel technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 178803

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next