No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DRIVER/5/SYSMACCHANGE

DRIVER/5/SYSMACCHANGE

Message

DRIVER/5/SYSMACCHANGE: System mac-address changed. (CurMac=[sysmac], PreMac=[presysmac])

Description

A system MAC address switchover was performed.

Parameters

Parameter Name Parameter Meaning
CurMac

Indicates the current stack MAC address.

PreMac

Indicates the stack MAC address before the switchover.

Possible Causes

After the stack MAC address switchover is configured, the MAC address changes when the stack splits or a member device leaves the stack.

Procedure

  1. Run the display system mac-address command to check whether the stack MAC address switchover is configured.

    • If so, go to Step 2.

    • If not, go to Step 3.

  2. Check whether an active/standby switchover occurs or a member device leaves the stack.
  3. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 122276

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next