No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/IF_NO_RES_NBR_EXIT: OSPF [ProcessId] cannot exit the helper mode on interface [IfName] as no restarting neighbor is found on this interface. (AreaId=[AreaId])


The OSPF process cannot exit from the helper mode because no restarter was found on this interface.


Parameter Name Parameter Meaning
[ProcessId] Process ID
[IfName] Interface name
AreaId Indicates the ID of the OSPF area.

Possible Causes

No neighbor that needed restart help was found on this interface.


  • This log message is informational only, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 179566

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next