Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/4/OSPFV3_NBR_REACH_LIMIT
Message
OSPFV3/4/OSPFV3_NBR_REACH_LIMIT: The number of OSPFv3 peers in single process has reached the upper limit. (ProcessId=[ProcessId], PeerCount=[PeerCount])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
ProcessId |
OSPFv3 process ID |
PeerCount |
Number of existing neighbors |
Procedure
- Run the display ospfv3 peer command to check the
number of OSPFv3 neighbors in the current process.
- If the number of OSPFv3 neighbors in the process has reached the upper limit, delete some OSPFv3 neighbors of the process so that the number of neighbors falls below the upper limit.
- If the number of OSPFv3 neighbors in the process has not reached the upper limit, go to Step 2.
- Contact Huawei technical support personnel.
Previous
