No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



TRILL/6/TRILL_RECV_SMALL_RLT_LSP: TRILL receive LSP with small Remaining Lifetime. (trillSysInstance=[hwTrillInstanceID], ifIndex=[ifIndex], ifName=[IfName], trillAdjSysID=[hwTrillSysID], trillPduLSPid=[hwTrillPduLspId], trillRemainingLifetime=[hwTrillRemainingLifetime])


This object indicates that the Remaining Lifetime of a received LSP is less than 60s.


Parameter Name Parameter Meaning


TRILL process ID


Interface index


Name of the interface that received the LSP


System ID of the neighbor that sent the LSP




Remaining Lifetime of the LSP

Possible Causes

The local device received an LSP generated by another device, and the LSP was newer than the corresponding LSP stored locally. In addition, the Remaining Lifetime of the LSP was non-zero and less than 60s.


  1. Run the display trill lsdb command to check the Holdtime field. This field indicates the value of Remaining Lifetime. Check whether the value is less than 60s.

    1. Check whether the Remaining Lifetime of the LSP is less than 60s when the neighbor sent it.
    2. Check whether the LSP is an attack packet.
    3. Check whether the Remaining Lifetime was changed manually.
    • If the Remaining Lifetime of the LSP is less than 60s, check whether it was changed manually.
      • If the Remaining Lifetime was changed manually, no action is required, and go to Step 3.
      • If the Remaining Lifetime was not changed manually, go to Step 2.
    • If the Remaining Lifetime of the LSP is not less than 60s, go to Step 2.

  2. Collect alarm information and configuration information, and then contact technical support personnel.
  3. End.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 170822

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next