Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/OSPFV2_LSDB_OVERFLOW
Procedure
- Run the display ospf brief command. If OSPF
is in LSDB overflow status is displayed in the command output,
the OSPF LSDB in the current OSPF process is overloaded.
If the OSPF LSDB is overloaded, go to Step 2.
If the OSPF LSDB is not overloaded, this log message is informational only and no action is required.
- Perform the following operations as required:
- If a change in the maximum number is allowed, run the lsdb-overflow-limit number command to increase it.
- If a change in the maximum number is not allowed, go to Step 3.
- contact technical support personnel.
- End.