Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CONFIGURATION/6/CFG_FILE_CHANGE
Message
CONFIGURATION/6/CFG_FILE_CHANGE: Configuration file was changed. (LogIndex=[LogIndex], SrcCmd=[SrcCmd], SrcData=[SrcData], DestData=[DestData], TerUser="[TerUser]", SrcAddr=[SrcAddr], ConfigChangeId=[ConfigChangeId], LogTime=[LogTime], CfgBaselineTime="[CfgBaselineTime]")
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
LogIndex |
Log index |
SrcCmd |
Methods in which the configuration change is
triggered.
|
SrcData |
Source of the configuration change.
|
DestData |
Objects to which the configuration change is
applied.
|
TerUser |
Terminal users during the configuration change |
SrcAddr |
Source address |
ConfigChangeId |
ID of a configuration change |
LogTime |
Time when the configuration changes |
CfgBaselineTime |
Baseline time when an important configuration changes. For example, the system refreshes the time when being restarted. |
