No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP/1/mplsLdpSessionDown_clear

LDP/1/mplsLdpSessionDown_clear

Message

LDP/1/mplsLdpSessionDown_clear: The LDP session status changes. (PeerLsrId=[PeerLsrId], VrfName=[VrfName], SessionType=[SessionType], IfName=[IfName], SubReason=[SubReason], Reason=[Reason])

Description

The status of the LDP session was Up, and the LSPs maintained by the session were set up.

Parameters

Parameter Name Parameter Meaning

PeerLsrId

Peer LSR ID

VrfName

VRF for an LDP session

SessionType

LDP session type:
  • Local
  • Remote
  • Local and remote

IfName

Name of an LDP peer interface

SubReason

Detailed cause for an alarm

Reason

Alarm cause

Possible Causes

Cause 0: The LDP sessions were configured.

Cause 1: The link state recovered.

Cause 2: New routes were installed.

Procedure

  • This alarm information is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 124158

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next