No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU
Support Documentation

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3/6/OSPFV3_NBR_CHANGE

OSPFV3/6/OSPFV3_NBR_CHANGE

Message

OSPFV3/6/OSPFV3_NBR_CHANGE:Neighbor changes event: Neighbor changes event: neighbor status changed. (ProcessId=[ProcessId], RouterId=[RouterId], Interface=[InterfaceName], NbrEvent=[NbrEvent], NbrPreviousState=[NbrPreviousState], NbrCurrentState=[NbrCurrentState], CpuUsage=[CpuUsage])

Description

The event that neighbor status changed was received.

Parameters

Parameter Name Parameter Meaning

ProcessId

Process ID

RouterId

Router ID of the neighbor

Interface

Interface name

NbrEvent
Event that cause neighbor status change:
  • 0: HelloReceived: indicates that a Hello packet is received from the neighbor.
  • 1: Start: indicates that the NBMA interface will send Hello packets to the neighbor at intervals specified by the HelloInterval field.
  • 2: 2WayReceived: indicates that the two ends can communicate with each other.
  • 3: NegotiationDone: indicates that the negotiation between the two ends has been completed.
  • 4: ExchangeDone: indicates that the two ends have exchanged complete DD packets.
  • 5: BadLsReq: indicates that an incorrect LSR is received.
  • 6: LoadingDone: indicates that the two ends have exchanged their databases.
  • 7: AdjOK: indicates whether the local end needs to establish a neighbor relationship with the peer end and maintain the neighbor relationship.
  • 8: SequenceNumberMismatch: indicates that the sequence numbers of DD packets from the neighbor mismatch that from the local end.
  • 9: 1Way: indicates that a 1-way Hello packet is received from the neighbor.
  • 10: KillNbr: indicates that the neighbor is deleted.
  • 11: LLDown: indicates that the lower-layer link between the two ends goes Down.
  • 12: InactivityTimer: indicates that the Hold timer of the neighbor is triggered.

NbrPreviousState
Previous neighbor states:
  • 0: Down
  • 1: Init
  • 2: Attempt
  • 3: 2Way
  • 4: ExStart
  • 5: Exchange
  • 6: Loading
  • 7: Full

NbrCurrentState
Current neighbor states:
  • 0: Down
  • 1: Init
  • 2: Attempt
  • 3: 2Way
  • 4: ExStart
  • 5: Exchange
  • 6: Loading
  • 7: Full

CpuUsage

CPU usage.

Possible Causes

Neighbor status changed.

Procedure

  • This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 178766

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2020 Huawei Technologies Co., Ltd. All rights reserved.