PIM/4/CRT_PIM_SG_FAIL
Message
PIM/4/CRT_PIM_SG_FAIL:In the VPN instance, PIM-SM failed to create the (S,G) entry in the multicast routing table. (VPNName=[VPNName], ProtocolType=[ProtocolType], GrpAddr=[GrpAddr], SrcAddr=[SrcAddr])
Description
(S, G) entries failed to be created in the PIM multicast routing table of a VPN instance.
Parameters
Parameter Name | Parameter Meaning |
---|---|
VPNName |
VPN instance name |
GrpAddr |
Group address |
SrcAddr |
Source address |
Procedure
- Run the display
multicast global statistics command to check whether
the limit for (S, G) entries is low.
- If the limit is low, go to Step 2.
- If the limit is not low, go to Step 3.
- Run the multicast global
limit pim command to set a proper limit.
- If the problem is resolved, go to Step 4.
- If the problem is not resolved, go to Step 3.
- Collect log information and configuration information, and then contact technical support personnel.
- End.