No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3/3/ospfv3ImptLsaThresholdExceed_active

OSPFV3/3/ospfv3ImptLsaThresholdExceed_active

Message

OSPFV3/3/ospfv3ImptLsaThresholdExceed_active:The number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm upper threshold.(hwOspfv3ProcessId=[hwOspfv3ProcessId], hwOspfv3Threshold=[hwOspfv3Threshold])

Description

The number of ASE LSAs generated when an OSPFv3 process imported external routes exceeded the upper alarm threshold (in percentage) multiplied by the maximum number allowed.

Parameters

Parameter Name Parameter Meaning

hwOspfv3ProcessId

OSPFv3 process ID

hwOspfv3Threshold

Upper alarm threshold configured for the number of ASE LSAs

Possible Causes

The number of ASE LSAs generated when an OSPFv3 process imported external routes exceeded the upper alarm threshold (in percentage) multiplied by the maximum number allowed.

Procedure

  1. Run the display ospfv3 command to check whether the number of ASE LSAs generated when an OSPFv3 process imported external routes exceeds the upper alarm threshold (in percentage) multiplied by the maximum number allowed.

    • If the number exceeds the upper alarm threshold (in percentage) multiplied by the maximum number allowed, this trap message is informational only and no action is required.

    • If the number has not exceeded the upper alarm threshold (in percentage) multiplied by the maximum number allowed, go to Step 2.

    NOTE:
    Check the overload status based on the value of the Current status field in the display ospfv3 command output.
    • Normal: The number of LSAs generated when an OSPFv3 process imports external routes is less than or equal to the lower alarm threshold (in percentage) multiplied by the maximum number allowed.
    • Approach limit: The number of LSAs generated when an OSPFv3 process imports external routes is approaching (reaching or exceeding 90% of) the upper alarm threshold.
    • Exceed limit: The number of LSAs generated when an OSPFv3 process imports external routes has reached or exceeded the maximum number allowed.

  2. Perform the following operations as required:

    • If a change in the limit on the number of ASE LSAs is allowed, run the import-route limit limit-number [ threshold-alarm { upper-limit upper-limit-value | lower-limit lower-limit-value } * ] command to change the limit.
    • If a change in the limit on the number of ASE LSAs is not allowed, go to Step 3.

  3. contact technical support personnel
  4. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 122073

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next