No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NTP/4/NTP_TRAP_SYS_PEER_CHANGE

NTP/4/NTP_TRAP_SYS_PEER_CHANGE

Message

NTP/4/NTP_TRAP_SYS_PEER_CHANGE: The NTP peer selected by the system is changed. (hwNtpOldSource=[OldSource], hwNtpOldSourceVpnName=[OldVpnName], hwNtpSource=[NewSource], hwNtpSourceVpnName=[NewVpnName])

Description

The NTP clock synchronization source of the system was changed.

Parameters

Parameter Name Parameter Meaning
hwNtpOldSource

IP address of original clock synchronization source

hwNtpOldSourceVpnName

Name of the VPN where the original clock synchronization source resides

hwNtpSource

IP address of clock synchronization source

hwNtpSourceVpnName

Name of the VPN where the clock synchronization source resides

Possible Causes

The NTP clock synchronization source of the system was changed.

Procedure

  • This log is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 137524

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next