No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RM/1/ArpFailure:Fail to add ARP table. (ErrorCode=[errorcode], Reason=[reason])


An ARP entry failed to be added to the ARP table.


Parameter Name Parameter Meaning


Failure return value


Failure cause

Possible Causes

Cause 1: Resources were insufficient.

Cause 2: The forwarding engine failed.


  1. Cause 1: Resources were insufficient.

    Check the configuration guide. If the number of resources reaches the upper limit, this is a normal situation. If the number of resources does not reach the upper limit, contact technical support personnel.

  2. Cause 2: The forwarding engine failed.

    Contact technical support personnel.

Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 169687

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next