No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSTP/4/MSTPLOG_PROPORT_STATE_FORWARDING

MSTP/4/MSTPLOG_PROPORT_STATE_FORWARDING

Message

MSTP/4/MSTPLOG_PROPORT_STATE_FORWARDING:The MSTP process's port has been set to forwarding state. (ProcessID=[ProcessID], InstanceID=[InstanceID], PortID=[PortID], IfIndex=[IfIndex], PortName=[PortName], PwName=[PwName])

Description

The port in the MSTP process entered the forwarding state.

Parameters

Parameter Name Parameter Meaning
ProcessID Indicates the MSTP process ID.
InstanceID Indicates the instance ID.
PortID Indicates ID of the port in the MSTP process.
IfIndex Indicates the interface index.
PortName Indicates the port name.
PwName Indicates the PW name.

Possible Causes

The network topology changed.

Procedure

  • The network topology changed.
    1. View physical devices on the network to check whether a new physical link that has STP enabled is added.

      • If a new physical link that has STP enabled is added, go to Step 2.
      • If no new physical link that has STP enabled is added, go to Step 3.

    2. Check whether the added physical link is necessary.

      • If the added physical link is necessary, go to Step 3.
      • If the added physical link is unnecessary, go to Step 4.

    3. Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id ] [ brief ] command to check whether the interfaces are consistent with the STP calculation results.

      • If the interfaces are consistent with the STP calculation results, the alarm will be cleared.
      • If the interfaces are inconsistent with the STP calculation results, go to Step 5.

    4. Correctly deploy the network topology, and then check whether the alarm is cleared. If the alarm persists, go to Step 5.
    5. Collect trap, log, and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 132711

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next