Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ND/4/hwInterfaceNDThresholdExceed_clear
Message
ND/4/hwInterfaceNDThresholdExceed_clear: The number of ND entries was restored to the threshold of interface. (entPhysicalIndex=[entPhysicalIndex], Slotname=[slotname], InterfaceName=[InterfaceName], Threshold=[Threshold], Number of dynamic ND entries=[DynEntries], Number of static ND entries=[StatEntries]).
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
entPhysicalIndex |
Index of the board that reports the clear alarm |
Slotname |
Name of the board that reports the clear alarm |
InterfaceName |
Name of the interface that reports the clear alarm |
Threshold |
Clear alarm threshold |
Number of dynamic ND entries |
Number of dynamic ND entries on the interface that reports the clear alarm |
Number of static ND entries |
Number of static ND entries on the interface that reports the clear alarm |
Previous
