No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Support Documentation
CloudEngine 8800, 7800, 6800, and 5800 V200R005C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSTP/4/PORT_STATE_DISCARDING

MSTP/4/PORT_STATE_DISCARDING

Message

MSTP/4/PORT_STATE_DISCARDING: The port has been set to discarding state. (InstanceID=[InstanceID], PortIndex=[PortIndex], IfIndex=[IfIndex], PortName=[PortName], PwName=[PwName])

Description

The port enters the Discarding state.

Parameters

Parameter Name Parameter Meaning
InstanceID Indicates the instance ID.
PortIndex Indicates the interface ID.
IfIndex Indicates the interface index.
PortName Indicates the port name.
PwName Indicates the PW name.

Possible Causes

The network topology changed.

Procedure

  • The network topology changed.
    1. View physical devices on the network to check whether a new physical link that has STP enabled is added.

      • If a new physical link that has STP enabled is added, go to Step 2.
      • If no new physical link that has STP enabled is added, go to Step 3.

    2. Check whether the added physical link is necessary.

      • If the added physical link is necessary, go to Step 3.
      • If the added physical link is unnecessary, go to Step 4.

    3. Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id ] [ brief ] command to check whether the interfaces are consistent with the STP calculation results.

      • If the interfaces are consistent with the STP calculation results, the alarm will be cleared.
      • If the interfaces are inconsistent with the STP calculation results, go to Step 5.

    4. Correctly deploy the network topology, and then check whether the alarm is cleared. If the alarm persists, go to Step 5.
    5. Collect trap, log, and configuration information, and contact technical support personnel.
Translation
简体中文
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 549916

Downloads: 133

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Huawei e+ App Huawei e+

Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :