No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



GRESM/6/GRESM_FSMTIMER_LOG:After 5 minutes timeout, resource pool became available, but there are still components not finishing smooth with GRESM. (ResType=[ResType], PidList=[PidList])


The address pool became available after the five-minute timeout period, but some components did not complete smoothing with GRESM.


Parameter Name Parameter Meaning
ResType Indicates the type of the resource.
PidList Indicates the list of components that did not complete smoothing.

Possible Causes

When the device was restarted or performed master/slave switchover, GRESM received no response because exceptions occurred in some components.


  • Collect configurations, log messages, and then contact technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 181001

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next