Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CLKSYNC/4/PTPTIMESTAMPUNCHANGE
Parameters
Parameter Name | Parameter Meaning |
---|---|
State |
Timestamp status. The value 0 indicates that the timestamp status is abnormal. |
Procedure
- Run the display ptp interface interface-type interface-number command to check whether the number of Sync
messages received by the current interface remains unchanged.
(1) If so, go to step 2.
(2) If not, go to step 3.
- Check whether the link fails. If the link fails, repair the link.
- Contact technical support.
- End.