Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM/4/CRT_PIM_WC_FAIL
Message
PIM/4/CRT_PIM_WC_FAIL:In the VPN instance, PIM-SM failed to create the (*,G) entry in the multicast routing table. (VPNName=[VPNName], ProtocolType=[ProtocolType], GrpAddr=[GrpAddr])
Description
(*, G) entries failed to be created in the PIM multicast routing table of a VPN instance.
Procedure
- Run the display
multicast global statistics command to check whether
the limit for (*, G) entries is low.
- If the limit is low, go to Step 2.
- If the limit is not low, go to Step 3.
- Run the multicast
global limit pim command to set a proper limit.
- If the problem is resolved, go to Step 4.
- If the problem is not resolved, go to Step 3.
- Collect log information and configuration information, and then contact technical support personnel.
- End.
Previous
