Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP/4/hwMplsLdpMultiLinkConfigInconsistent_active
Message
LDP/4/hwMplsLdpMultiLinkConfigInconsistent_active: A MPLS LDP multi-link configurations are inconsistent. (VrfName=[VrfName], PeerLsrId=[PeerLsrId], LocalLsrId=[LocalLsrId], ConfigIfName=[ConfigIfName], ConfigRmtPeerIp=[ConfigRmtPeerIp], ConfigType=[ConfigType], EffectKa=[EffectKa], EffectTa=[EffectTa], EffectLam=[EffectLam])
Parameters
| Parameter | Description |
|---|---|
| VrfName | VRF name of LDP session exists. |
| PeerLsrId | LDP session ID. |
| LocalLsrId | Local LSR ID. |
| ConfigIfName | Configure the current interface name. |
| ConfigRmtPeerIp | Configure the IP address of the remote session. |
| ConfigType | Configuration inconsistent type. |
| EffectKa | KeepAlive value used by the LDP session. |
| EffectTa | LDP transport addresses used by the session. |
| EffectLam | Peer use label advertisement mode. |
Previous
