No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



CONFIGURATION/4/CFG_SYNCFGFILEFAIL: Failed to synchronize the next startup configuration file to slave board because [Reason]. (FileName=[FileName], SlotNum=[SlotNum])


The configuration file for the next startup failed to be synchronized to the slave main control board.


Parameter Name Parameter Meaning
[Reason] Cause of the configuration file synchronization failure
FileName Name of the configuration file for the next startup
SlotNum Slot ID of the slave main control board

Possible Causes

The configuration files for the next startup on the master and slave main control boards were different. As a result, after the slave main control board started, the configuration file synchronization failed.


  1. After the device starts, perform a manual configuration file synchronization.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 169185

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next