No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RIP/6/RIP_ADD_RTE_FAILED: Because of unsuccessful validation, routes not added to database. (Destination=[IPADDR]/[STRING], Interface=[STRING], ProcessId=[ULONG]).


Failed to add routes to the database due to unsuccessful validation.


Parameter Name Parameter Meaning
Destination Indicates the destination IP address.
Interface Indicates the interface name.
ProcessId Indicates the process ID.

Possible Causes

Failed to add routes to the database due to unsuccessful validation.


  1. Run the display diagnostic-information command, save the command output, and then contact technical support personnel technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 169600

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next