MPLS_LSPM/2/hwMplsResourceTotalCountExceed_active
Message
MPLS_LSPM/2/hwMplsResourceTotalCountExceed_active: The number of used MPLS resources reached the maximum number. (hwMplsResourceType=[ResourceType], hwMplsResourceTotalCount=[ResourceTotalCount])
Description
The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.
Parameters
Parameter Name | Parameter Meaning |
---|---|
hwMplsResourceType |
Type of MPLS resource |
hwMplsResourceTotalCount |
Maximum number of MPLS resources supported by a device |
Possible Causes
The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.
Procedure
- Check the hwMplsResourceType field and obtain the MPLS resource type.
- Delete configurations that use MPLS resources or configurations
or messages that trigger MPLS resource consumption to reduce MPLS
resource usage. Then check whether the alarm is cleared.
- If the alarm is cleared, go to Step 4.
- If the alarm persists, go to Step 3.
- Collect log information and configuration information, and then contact technical support personnel..
- End.