No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QOS/2/hwXQoSFCoEPriorityAlarm_active

QOS/2/hwXQoSFCoEPriorityAlarm_active

Message

QOS/2/hwXQoSFCoEPriorityAlarm_active: The mapping from PHBs to 802.1p priorities for outgoing packets has been disabled, so 802.1p priorities of FCoE packets may be incorrect and FCoE packets may be lost.

Description

After the mapping from PHBs to 802.1p priorities is disabled for outgoing packets on an interface, the priority of FCoE packets may be incorrect. As a result, FCoE packets may be discarded.

Parameters

Parameter Name Parameter Meaning

None

None

Possible Causes

When FCF or NPV is configured, the qos phb marking 8021p disable command is used to disable the mapping from PHBs to 802.1p priorities for outgoing packets on an interface.

Procedure

  • Run the undo qos phb marking 8021p disable command to enable the mapping from PHBs to 802.1p priorities for outgoing packets on an interface.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 121727

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next