No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QOS/2/hwXQoSFCoEPriorityAlarm_active
QOS/2/hwXQoSFCoEPriorityAlarm_active
Message
QOS/2/hwXQoSFCoEPriorityAlarm_active: The mapping
from PHBs to 802.1p priorities for outgoing packets has been disabled,
so 802.1p priorities of FCoE packets may be incorrect and FCoE packets
may be lost.
Description
After the mapping from PHBs to 802.1p priorities is
disabled for outgoing packets on an interface, the priority of FCoE
packets may be incorrect. As a result, FCoE packets may be discarded.
Parameters
Parameter Name
Parameter Meaning
None
None
Possible Causes
When FCF or NPV is configured, the qos phb
marking 8021p disable command is used to disable the mapping
from PHBs to 802.1p priorities for outgoing packets on an interface.
Procedure
Run the undo qos phb marking 8021p disable command to enable the mapping from PHBs to 802.1p priorities for
outgoing packets on an interface.