No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SYSTEM/2/HAF_SWITCH_FAIL: Failed to run slave switch with SlvSwitchIndex [SlvSwitchIndex], ChassisNum[ChassisNum].


Failed to perform the master/slave MPU switchover.


Parameter Name Parameter Meaning
SlvSwitchIndex Index to the master/slave MPU switchover
ChassisNum Chassis ID

Possible Causes

The master/slave MPU switchover failed.


  1. Check wether the slave MPU is in the Up state but the switchover fails, contact technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 169214

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next