No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



VOSMEM/4/DEBUG_MEMOVERLOAD: The Memory is overloaded, and the processes with top three Memory occupancy are [location-name]. (MemoryUsage=[UINT32]%%, Threshold=[UINT32]%%)


The memory was overloaded, and the three processes with the highest memory usage were displayed.


Parameter Name Parameter Meaning


Process name


Memory usage


Memory usage threshold

Possible Causes

The memory usage was too high.


  1. Find out the cause of high memory usage. If needed, remove unnecessary services and configurations to reduce the memory usage. Then, check if the log message will still be generated.

    • If the log message is no longer generated, the problem is solved.

    • If the log message continues to be generated, go to Step 2.

  2. Collect log messages and contact technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 179544

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next