Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP/4/LDP_GR_TIMER_START
Message
LDP GR timer start. (PID=[hPid], CID=[hCid], VrfName=[VrfName], ReconnectTimer=[ReconnectTimer], PeerID=[PeerID], GRTimerType=[GRTimerType])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
hPid |
local PID. |
hCid |
local CID. |
VrfName |
VRF name. |
ReconnectTimer |
Timeout period of the timer. |
PeerID |
Peer ID |
GRTimerType |
GR timer type. |
Possible Causes
Cause 1: The Reconnect timer starts. After a master/slave board switchover is performed on the GR Restarter, the GR Helper detects the failure to establish an LDP session with the GR Restarter. In this case, the GR Helper starts the Reconnect timer.
Cause 2: The Recovery timer starts. After an LDP session is reestablished, the GR Helper starts the Recovery timer.
Previous
