No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEVM/4/hwIfMonitorOutputRateRising_active

DEVM/4/hwIfMonitorOutputRateRising_active

Message

DEVM/4/hwIfMonitorOutputRateRising_active: Interface output flow bandwidth usage exceeded the trap threshold. (Interface=[IfIndex], BandWidthUsage=[hwIfMonitorOutputRatePercentage], TrapThreshold=[hwIfMonitorOutputRateThreshold], InterfaceName=[InterfaceName])

Description

The percentage of the rate of outgoing traffic to the total bandwidth on an interface exceeded the threshold.

Parameters

Parameter Name Parameter Meaning

Interface

Specifies an interface index.

BandWidthUsage

Indicates statistics on outgoing traffic.

TrapThreshold

Specifies an alarm threshold for outgoing traffic.

InterfaceName

Specifies an interface name.

Possible Causes

The percentage of the rate of outgoing traffic to the total bandwidth on an interface exceeded the threshold.

Procedure

  1. Run the display this interface command in the interface view to check whether the alarm threshold is set too small. The threshold range is specified by users according to service requirements.

    • If so, go to step 2.
    • If not, go to step 3.

  2. Run the trap-threshold output-rate bandwidth-in-use command in the interface view to set the alarm threshold to a larger value. Check whether the trap is cleared.

    • If so, no action is required.
    • If not, go to step 3.

  3. Collect traps, logs, and configurations, and contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 126366

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next