No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ND/4/hwSlotNDThresholdExceed_active: The number of ND entries exceeded the threshold of slot. (entPhysicalIndex=[entPhysicalIndex], Slotname=[slotname],Threshold=[Threshold], Number of dynamic ND entries=[DynEntries], Number of static ND entries=[StatEntries]).


The number of ND entries on a board exceeded the 80% of alarm threshold.


Parameter Name Parameter Meaning


Index of the board that reports the log


Name of the board that reports the log


log threshold

Number of dynamic ND entries

Number of dynamic ND entries on the board that reports the log

Number of static ND entries

Number of static ND entries on the board that reports the log

Possible Causes

Many services were deployed, triggering the board to learn a large number of dynamic ND entries. Or, a large number of static ND entries were configured on the board.


  • Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 138052

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next