No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP/4/SNMP_MIB_SET_FAILED

SNMP/4/SNMP_MIB_SET_FAILED

Message

SNMP/4/SNMP_MIB_SET_FAILED: MIB node set failure. (UserName=[UserName], SourceIP=[SourceIP], Version=[Version], RequestId=[RequestId], ErrorStatus=[ErrorStatus], ErrorIndex=[ErrorIndex], [OIDName], VPN=[VPN])

Description

The MIB object was set failed.

Parameters

Parameter Name Parameter Meaning
UserName Indicates the name of user.
SourceIP Indicates the source IP address.
Version Indicates the version.
RequestId Indicates the ID of a request.
ErrorStatus Indicates error status, including:
  • 0: noError
  • 1: tooBig
  • 2: noSuchName
  • 3: badValue
  • 4: readOnly
  • 5: genError
  • 6: noAccess
  • 7: wrongType
  • 8: wrongLength
  • 9: wrongEncoding
  • 10: wrongValue
  • 11: noCreation
  • 12: inconsistentValue
  • 13: resourceUnavailable
  • 14: commitFailed
  • 15: undoFailed
  • 16: authorizationError
  • 17: notWritable
  • 18: inconsistentName
ErrorIndex Indicates the index of a variable that fails to be set. This log records all variables that need to be set by the NMS. For example, if the fifth variable fails to be set, the value of ErrorIndex is 5.
[OIDName]

Indicates OID and value of a node in a Set request. If the node is a password node, the value is displayed as ******.

If a Set request contains many nodes and the information about these nodes cannot be completely displayed in one log, the information is displayed in multiple logs.

If the length of a node's OID exceeds 512 bytes or the total length of a node's OID and value exceeds 1024 bytes, the last part is displayed as an ellipsis (…).

VPN

Indicates the name of a VPN instance.

Possible Causes

The information about the SET operation failed on an MIB object was recorded into the log.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 122686

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next