No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2VPN/3/LDP_MSG_ERR

L2VPN/3/LDP_MSG_ERR

Message

L2VPN/3/LDP_MSG_ERR:Received an error or unknown signal message. (MessageType=[STRING], PeerIpAddress=[IPV4IPV6], ErrorReason=[STRING])

Description

Received an error or unknown signal message.

Parameters

Parameter Name Parameter Meaning
MessageType Indicates the type of message.
PeerIpAddress Indicates the remote ip address.
ErrorReason Indicates the reason of the error.

Possible Causes

The received L2VPN LDP signaling packets has an error or unknown field. The possible cause is that the remote device is a non-Huawei device. After this symptom occurs, the VC connection may fail to be set up, the VC labels may fail to be released, the VC status may be incorrect, and the MAC address entries may fail to be cleared.

Procedure

  • Check whether the signaling packet sent from the remote device complies with the RFC.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 121657

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next